The Molding Miracle(tm)...48 inch stick

Brief Description

Product Details

The Molding Miracle is a brand new product designed to end the frustration and aggravation involved when installing any type of base molding in your house. It’s application is perfect for pine, paint or stain grade and even composite molding. The product is actually an extrusion molded composition of polymer and pvc type materials that has a shape similar to a triangle with a break in the center of the long side. The height of the product is approximately 1 3/8 " and the two sides are 1 1/4 " with legs approximately 7/8" toward the center. This patent pending design allows the product to free stand in the corner and freeing the craftsman to work and insert the base molding into the corner without assistance.
You have, I’m sure, been frustrated when installing baseboard trim in the corners of your house. No matter how well you cut the trim, the 45° angles don’t ever seem to match up. The Molding Miracle is designed to end that problem. Typically, let’s take for example an 8’ wall, when the walls are built, the finished wall height is about 97 ¼ inches. After the installation of the ceiling panels and the wall panels, about 96 ½ inches of the wall is covered, and the indention for the drywall joint tapers up to about 2” above the sub floor level. When the baseboard is installed in this tapered area, the trim nailer “draws” the trim into the recess or indented area causing an unsightly gap in the bottom of the trim. This has been a longstanding problem requiring additional time and resources to correct. The worst case scenario, the baseboard was left loose in the corner only to be discovered when the carpet or some other type of floor covering was installed. Until now, it was necessary to cram cardboard, or drive nails into the wall or sub floor to hold out the trim to the proper plane. These “quick fixes” took time and didn’t always work, requiring extra time caulking the cracks before painting and touchup. Even after caulking, depending on the quality of the caulk, room temperature and humidity levels, the caulk would crack and dry out requiring more time for repairs and painting.

The Molding Miracle alleviates these problems in one simple easy step. Simply measure and cut your mitered inside corners as normal, set one of The Molding Miracle in place and set the trim in place and nail. The Molding Miracle also works if you cope your corners instead of miter them. The patented design of the Molding Miracle fills the void from the indented area on the drywall and you have a nice clean corner for your baseboard trim, requiring less time and labor and headache. The quality look of the finished product will be a pleasure to finish and paint using less, if any, caulk with no unsightly gaps.

The beauty of this product is that it works on your application no matter what type of floor covering you are using. In new construction, simply set The Molding Miracle on the sub floor and elevate the trim as necessary for linoleum, carpet, tile or hardwood. The Molding Miracle is left behind the trim and designed to be out of the way for your final flooring installation. Nothing to cleanup, no nails to pull, no marred up trim.

So whatever type of baseboard trim you are installing, get The Molding Miracle today to make your job easier and more professional looking so that you get the ultimate benefit of the product…..more time to relax and enjoy the finished product!

Product Selling Benefits

There are several key product benefits for The Molding Miracle. We are offering for sale the product in two ways: a pre-packaged, pre-cut bag of 16 corners that is ready to go with an instruction labels and GS1 US certified UPC code preprinted. The second method is a 48" stick that is easily cut with the carpenters miter saw at a substantial savings to the craftsman requiring him/her to cut the product themselves for financial savings. The composition of the material has been changed so the 48" sticks are easily cut with the miter saw and there is no potential damage to the expensive saw blade. The 48" stick is shipped in a 15 pc box (5 x 5 x 50) with a full color label on the box ready for display after cutting the top off of the box just above the label. Each 48" stick also has a label affixed to it with directions and it's own certified UPC code ready for POS scanning and selling.
The product works regardless of the style of floor covering, or the height and thickness of the baseboard. The key factor is that the void due to the taper in the drywall is filled and is a huge benefit due to the time saved by not having to do trial and error fittings and make adjustments, reducing or eliminating the need for caulk application post installation and creating a better fitting corner displaying the carpenters craftsmanship.
The design of the product is such that it needs only be placed in the corner and there is no need for pre-nailing or gluing it in place. The composition allows that the product can be shot through or cut without shattering. And it is pliable so that it can fix any variable of corner where the tapered edge of the drywall creates a problem from an area that is virtually flat to 22, 45, or beyond the 90 degree angles.
We are confident that once you have used our product, you will wonder how you ever got along without it before.