Product Details

PRODUCT DESCRIPTION

Naturally add humidity to any room of your home without increasing energy costs. This eco-friendly alternative offers an effective way to raise overall moisture, and it is able to do so without a single bit of electricity or battery power. This means that you don't have to worry about placing it next to an outlet, and your energy bill will not go up when it is in use. The G-Midifier will offer the same benefits of more expensive, electronic versions, but it will help you eliminate many of the common annoyances at the same time. There will be no loud fan to create a constant hum, and there will be no expensive filters to replace. You also won't have to worry about over humidifying the room to cause water stains on ceilings, walls or furniture. Despite the lack of buttons and moving parts, this simplistic and natural room humidifier will be just as good as traditional units for combating the dry air in your home in order to make it more livable. Use one in any room to counteract the lack of moisture created by climate change or using your furnace or central AC.

HOW DOES IT WORK

With the G-Midifier, water is not blown around or ultrasonically evaporated in order for it to diffuse into the air. It works by simple evaporation techniques, but the advanced design makes it incredibly efficient despite it's simplicity. The entire unit is essentially a container that holds water and 13 pieces of absorbent material in an upright fashion. The container is designed in such a way to allow for maximum air flow in all directions. The air in your home is able to flow up through the bottom of the container, and all around each piece material. This key design feature is integral to functionality, and the secret to why it works so well. Each piece of filter material is actually comprised of a highly absorbent polyester material that is able to soak up several times it's own weight in moisture. These absorbent squares will wick water from below in order to completely saturate themselves. This action vastly increases the surface area of the water in order to increase evaporation. Once the water evaporates off the pad, it is diffused into the air and the humidity in the room goes up. A single unit is good for a normal sized room and can easily humidify areas of up to 200 square feet.

To add water to this humidifier, you simply pour it into the bottom of the container. The large opening at the front, and the curve of the pads makes this action easy. Once filled, the water will disburse itself evenly, and then the white squares of material will do the rest. Ideal placement of the unit would be over a heater or AC vent on the floor, but it can literally be used anywhere with great results. When placed over a vent, the increased air flow will improve the effect, and allow more water to evaporate in a shorter amount of time. The unit is the perfect size to cover the full vent, and when the air blows, it will flow up through the integrated holes and then over and through each filter. The feet on the underside will allow for good air circulation when placed anywhere. So, the G-Midifier will be effective even when placed on a shelf or dresser.

In order to use the G-Midifier, simply find a level place to put it, and then fill with water. It does not need to be over an air vent, but this will increase air flow and allow it to provide more humidity. Once placed, simply fill with about a half gallon of water. The filters will begin to soak up moisture right away in order to evaporate it into the air, but it may take several hours for them to become fully saturated. Once they are completely soaked, the unit will operate at full capacity until the water runs out. If distilled or filtered water is used, it will prevent mineralsand other contaminates from discoloring or otherwise dirtying the pads. This will decrease the frequency of maintenance that is required.