Product Details

The Active Gun Unit (AGU-900, XE-118-Detector, is a Hand Held Explosive Detector) can also detect any anomaly (disturbances) in the PMM energy force fields by using an active signal set of Pulses Wave Oscillations (PWO) transmissions that disturb the PMM, it then converts the resultant signals from the PWO to SRC codes; producing very useful table of data indemnifying all of the 118 elements and assigning a useful type of numbering system to them. This is what makes the Time Domain Disturbance Motion Energy Field theories so exciting. This is a real useable technology. We use these technologies in our advanced material explosive detectors, and other devices.

So the XE-118 Detector searches for the magnetic motion beads RofC. All elements and matter will have a very individual/distinctive set characteristic and patterns that are magnetic; these are the Signature Recognition Codes (SRC) we are looking for. As the magnetic motion beads come in contact with the XE-118 Detector, the XE-118 Detector (the family of ASB detector) captures these magnetic motion beads RofC changes, and because all materials will have a different RofC we can ascertain what materials/elements we are looking at. This is a key point. So as the magnetic motion beads are moving in a magnetic pattern around the earth (in motion) we gather these magnetic motion beads with the XE-118-Detector. So when the XE-118-Detector transmits a low power, low frequency, of a classified signal cloud, it creates a large hole-cloud, a sort of drain attracting what the XE-118-Detector is pointing at. This is like a motion magnetic magnet, as the motion magnetic is transmitting it sets up a tunnel highway to and from the target. The analogy to a water drain of least resistant, the motion magnetic beads gravitate to the place where the hole is. This, of course, is what we call the Different of Potential (DofP) draw ( if the DofP is strong enough it will draw just about anything). At this point, you have to be creative and think out of the box. The XE-118-Detector sets up a tunnel that is sometimes vertical and sometimes in a very irregular shape, but indeed it is the disturbance at the end of the tunnel that draw-in the motion magnetic beads just like a giant magnet draw in a ferrous material. So when the XE-118 Detector is pointed at a target it sets up a tunnel with very little power and disturbs the atmosphere opening a destructive tunnel/ passageway to what the XE-118-Detector is pointed toward. The disturbance at the end of the tunnel is where the antenna is located; the antenna is where the PWO signal is sent to the target, normally this is either built into to the detector or in another configuration. This is why an antenna or transmitting device can be made in many different shapes, for example in just about any shape.

So to recap the XE-118-detector sets up a disturbance at the antenna and is also added too by the fact that the magnetic motion beads are moving and constantly in movement. To elaborate and further make it clear as the magnetic motion beads start to gather in the tunnel they form a tight shaft of these beads that are bound together like dominions end to end, so if one of these dominions at either end are pushed or moved it affects the other end of the dominions. So at this point it is dominions affect sending and receiving data/power in a bi-directional manner. At this point the XE-118-Detector starts to transport the targets data and sent it to the receiving tubes or the designator collectors.